تصویر انواع و اقسام فایندرهای موجود در ایران و خارج ایران @
تصویر انواع و اقسام فایندرهای موجود در ایران و خارج ایران @
با سلام خدمت کاربران و مدیران عزیز : مجموعه تقریبا کاملی از عکسهای انواع فایندر رو که جمع آوری کرده بودم که لازم دیدم در جهت تکمیل مطالب این بخش در تاپیکی معرفی کنم . امید وارم مورد توجه قرار بگیره...............
فايندر حرفه اي DIGISAT PRO داراي نمايشگر با صفحه LCD . مناسب و دقيق ترين براي نصب دقيق و حرفه اي. چك كردن همزمان دو ال ان بي . سازگار با موتورهاي Diseqc . تواني كشف امواج بسيار ضعيف. توانايي كار با .13/18 V (and mA) +22 kHz + DiSEq حدود قيمت 60 يورو. فايندر SAT BEEPER
داراي خروجي صدا و هدفون . پيدا كردن سريع سيگنال. هزينه بسيار كم. استفاده آسان. حدود قيمت 17 يورو.
فايندر قطب نمايي SAT SATELLITE COMPASS
تنظيم آنتن بشقابي ماهواره شما آنرا خيلي آسانتر مي كند اگر شما حدودي* مسير ماهواره را مي*دانيد. اين وسيله زمان تنظيم دقيق ديش به سمت ماهواره مورد نظرتان را كاهش مي*دهد هزينه بسيار كم. استفاده آسان. حدود قيمت 10 يورو.
فايندر ساده خانگي
هزينه كم. براي مصارف خانگي و كساني كه گهگهاني به فايندر نياز دارند. ابزاري عادي براي پيدا كردن ماهواره هاي آنالوگ و ديجيتال. نشان دادن دريافت سيگنال توسط چراغ قرمز رنگ و صداي بوق. حدود قيمت 30 يورو.
اين هم فايندر عقربه*اي ( كه اكثر نصاب*ها ايران از آن استفاده مي*كنند) - البته قديمي است موفق باشيد.
با سلام Model Super Buddy™ Satellite Signal Level Meter $679
اينم کارايش Field Replaceable F - connectors (barrel connectors)
Calibrated Signal Level (dBm, dBmV or dBµV)
Holds ALL satellites and ALL their transponders
Field Guide software updates are available as free downloads from www.appliedin.com
Ability to LOCK on WildBlue internet satellite and able to identify relevant geographic-specific WildBlue spot beam based on your Zip Code
Ability to LOCK on new Dish Network 118.7 and 129 satellites with 8PSK signals
Ability to do new DirecTV AT9 KaKu Installs (Can LOCK on and display signal strength for 101, 110, and 119 and will display signal strength for 99 and 103)
BER (Bit Error Rate, Reed Solomon)
Zip Code Lookup - Ability to obtain needed azimuth, magnetic heading, and elevation for antenna install preparations based on your Zip Code
Tunable to individual transponders
Quick Charge Battery
Ability to manually enter new custom satellites using front panel keypad (ideal for lab use or military classified satellite use)
Rugged durable aluminum case with rubber shock guards and weatherproof gaskets
Troubleshooting ability (Can display Voltage supplied by IRD and Current drawn by LNB)
Works with both normal and stacked frequency plans .
با سلام Model SAT 9520™ Satellite Signal Level Meter $1,195
اينم کارايش
Features
Satellite ID capable
RS-232 computer interface for upgrading channel plans by the internet
LNB power with 13 or 18 volts and 22 kHz tone
Audible tone for aligning the dish
Tunable to individual transponders
Strong, fast-charge, internal battery
Numeric LCD with backlight
Compact, durable, and field portable
Applications
Site surveys
Single family installations
Multiple dwelling unit system installations and alignments
Measurements
Present and peak signal level (dBm, dBmV or dBµV)
Signal quality, IRD equivalent value
Carrier/Noise Ratio (C/N, Eb/No or Es/No)
Pre and post-FEC Bit Error Rate (BER)
Min/max critical parameter measurements of right and left hand polarity channels
Specifications
Frequency range 950 to 2150 MHz Signal level range -68 to -8 dBm (-20 to +40 dBmV) (+40 to +100 dBµV) Signal bandwidth 24 MHz Pre-FEC BER range 2.0E-2 (1/50) to 4.0E-7 (1/2,500,000) Battery charge life 3 to 6 hours of LNB power (depending on LNB current) Battery recharge time Fast charge in 2 hours Battery type Internal 1800mAh NiCd LNB power 13/18 VDC current limited to 500 mA Size (H x W x D) 8.5" x 6.5" x 3.25"
(21.5cm) x (16.5cm) x (8.3cm)
Weight 4.5 lbs. (2.04 kg) Operating Temperature 0°F to 130°F (-17°C to 55°C)
همينطور که می بينيد اين نوع فايندرها اسم جهتی که ميگيريد تشخيص ميده.
This NEW version supports DishPro Plus LNBFs from DishNetwork.Sale $419
This portable satellite meter is used for identification of satellite broadcasts throughout the world. The satellite meter is essential equipment where precise satellite identification is crucial - especially true in digital (DVB/DSS) transmission set-up in both the C band and Ku band ranges. Using this satellite meter, with easy adjustment and calibration, the local installer can perform more accurate dish alignment quickly leading to fewer call-backs.
This meter is programmable, user friendly and ideal for installation of VSAT, internet-over-satellite systems as well as the digital satellite TV. Analyzing the data stream the satellite meter gives you precise identification of the satellite desired and ignores any others in the arc.
Offering DiSEqC compatibility, positive satellite identification, and pinpoint accuracy. All-new digital satellite meter! used by professionals to make the installation of DBS satellite antennas and VSAT antennas much easier and faster
Easy selection and identification of chosen satellite
Compatible with all transmissions: Ku and C band DVB and DSS
Can be calibrated to suit local BER & Signal Strength conditions
Four line display of the vital information.
Picture quality measurement to maximize the accuracy of both cross-polarity and pointing accuracy.
Removable NiMH high-capacity battery
Recharge in the field using car lighter adapter.
LNB short circuit protection
LNB power supply
Control of 22kHz and DiSEqC-type switches (software controlled only - not user controlled)
Simple use with a three-button control panel.
Robust and lightweight. The unit weighs less than one kilo (2.2 lbs)
Charging time: more than 4 hours, less than 5 hours.
Power adapter input: AC110V / 60Hz / 220V / 50Hz
Power adapter output: 10.5VDC 1000mA
RS232 connecter for PC upgrade
Display: 124 x 64 wide-range temperature liquid crystal display.
Audio output: build-in speaker
Port: USB (default)
Switch: 22 KHz support
FEATURES
·Total software upgrade
·Software stored in Flash memory for later upgrade
·Pre-programmed with most regionally used satellites
·Uses USID
·Signal strength and Bit Error Rate (Picture Quality) displayed simultaneously.
·Easy reading LCD display.
·Back lit display.
·Up to 80 satellites may be programmed.
·Bar-graph for Signal Strength
·Bar-graph for BER (Picture Quality).
·Satellite settings store in non-volatile EPROM
·Short circuit proof on LNB output.
·Internal battery powers the LNB
·Works with all stander, universal, linear (DVB) and circular (DSS) polarity LNBs
·Weight approx less than 2 lbs.
·Size approx: 9.84in W x 4.72in H x 2.36in D (250 x 120 x 60 mm)
·Set satellite's related parameter which includes LNB frequency and working voltage (mode of polarization), satellite downstream frequency, symbol ate, 22K situation etc.
·AZ, EL, and PO self-calculated for providing initial dish set-ups.
·Align dish without IR/D, TV and power.
·In alignment process, once a satellite is found by setting related parameter, we can adjust the dish's orientation and pitching angle according to inside audible tone
·Measure RF signal level, bit error rate, carrier-to-noise rate and current.
·Provides special software that can be used to check local position. AZ, EL, and PO for almost all big cities around the world in alignment process of a certain satellite.
·Plans can be downloaded from a certain website by RS232 port
موفق باشيد.
|+| نوشته شده توسط s.ansari در سه شنبه دوازدهم دی 1385 و ساعت 16:56 |
شناخت دستگاه فايندر و طريقه تنظيم ديش بوسيله آن
شناخت دستگاه فايندر و طريقه تنظيم ديش بوسيله آن
فایندر وسیله ای است برای جهت یابی دیش که داراي دو مدل ديجيتال و آنالوگ است و ما بين ريسيور و ديش قرار مي گيرد و با ولتاژي که از طرف ريسيور براي تغذيه ال ان بي و بکار افتادن آن ارسال مي شود اين دستگاه روشن مي شود
[روش کار با فایندر:
در قسمت منوی سیستم روسیورتان روی فرکانس مورد نظری که قسط دارید روی آن تنظیم دیش را آغاز کنید بروید و سپس به سراغ LNB ها روفته و یک سر فایندر که نوشته شده است To LNB را به LNB بزنید و سر دیگر که نوشته شده است To Reciver را به کامل اصلی که به رسیور می رسد بزنید. توجه: از فرکانسهای افقی H استفاده کنید. فرکانس هاي هوريزانتال قوي تر است و همچنين در تنظيم ساعت ال ان بي دچار مشکل نمي شويد توجه: اگر شما از سوئيچر توي مدار استفاده می کنید باید کابل اصلی را از سوئيچر خارج کرده و آنتن را به فایندر به صورت مستقیم وصل کنید. بعد از نصب فایندر عقربه فایندر را به وسیله ولومی که روی فایندر است به سمت 5 تا 6 بیاورید و با حرکت دیش به صورت عمودی و افقی سعی کنید که عقربه به سمت 10 برود و سپس عقربه را با ولوم به شماره 6 برگردانید و دوباره این عمل را انجام دهید تا دیگر عقربه پیشرفتی نداشته باشد.
مراحل را دنبال کنید: 1-ساعت LNB را باید تنظیم کنید(منظور از ساعت فلش مثلثی شکلی است که در حاشیه دایره LNB حک شده است) بعضی از ساعت های مربوط به جهت های مختلف: HOTBIRD ساعت 10-11 NILSAT ساعت 10 ARABSAT ساعت 11 INTELSAT902 ساعت 6 TORKSAT ساعت 12 2-موقعیت ماهواره مورد نظر را بدانید. بعضی از موقعیت های ماهواره ها HOTBIRD 29 درجه به سمت راست قیله NILSAT 35 درجه به سمت راست قیله ARABSAT 20 درجه به سمت چپ قیله INTELSAT90225 درجه به سمت چپ قیله TURKSAT درست خود قبله 3-حدوداً دیش را به سمتهای داده شده بچرخانید و آرام آرام دیش را به سمت چپ یا راست ببرید و در همان حال وضعیت بالا و پایین بودن میله عمودی را هم تغییر دهید تا فایندر شروع به بوق زدن ممتد و بدون قطع کنید وقتی که فایندر بوق بدون قطع شدن زد یعنی اینکه دیش شما در باند فرکانس ماهواره مورد نظر می باشد. توجه: بوق هایی که در حرکت دادن دیش تولید می شود به علت این است که در جهت ماهواره دیگری قرار دارید و به این بوق ها دل خوش نکنید فقط اگر بوق ممتد و بدون قطعی شنیدید به معنی پیدا شدن ماهواره است. توجه: بعد از شنیدن بوق دیش را یکم محکم کنید و با حرکت های آرام و میلی متری سعی در بهتر شدن جهت فایندر بکنید و ساعت LNB را هم نیز بعد از اتمام کار با چرخاندن آن به آرامی به بهترین حالت ثابت کنید
|+| نوشته شده توسط s.ansari در سه شنبه دوازدهم دی 1385 و ساعت 16:40 |